Kingston
Hyper-X Predator 4 x 8GB 2666MHz DDR4 Desktop Memory Kit (HX426C13PBK4/32)

Hyper-X Predator HX426C13PBK4/32

HyperX HX426C13PBK4/32 is a kit of four 1G x 64-bit (8GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 32GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 13-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS

• JEDEC: DDR4-2133 CL15-15-15 @1.2V
• XMP Profile #1: DDR4-2666 CL13-14-14 @1.35V
• XMP Profile #2: DDR4-2400 CL13-13-13 @1.35V

FEATURES

• Power Supply: VDD=1.2V Typical
• VPP - 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• Height 2.167” (55.05mm), w/heatsink

Please make sure you have checked compatibility between the memory you want to purchase and the motherboard or notebook for which the memory is intended to be used. If the package is opened and the memory is not in resealable condition it cannot be returned for credit.
        
 Kingston, Crucial, OWC & Transcend memory - when not in stock can be ordered on request - takes 5-15 business days.

Check Kingston compatibility here:  https://www.kingston.com/us/configurator